My daughter, Emma, loves to collect farm toys and she has been collecting a lot lately.
She had a bunch of these for Christmas and it was really fun to build her own version of the classic farm toy.
You can use any kind of wood or other wood products and even cut your own parts, but I recommend making your own pieces.
I had some pieces on hand, so I decided to build one of mine myself.
It is very simple to build and it can be made very easily.
Emma is very enthusiastic about this and loves it.
The finished product is quite impressive!
It is a bit different than a traditional farm toy, but this is what you need to build it: a large piece of wood that can be easily cut.
The piece is not only decorative but also functional.
If you are a little less picky, you can also use other types of wood for the base of the toy, such as pine, cedar or ash.
The base is made of two pieces of wood, one for each side of the figure.
The bottom piece is attached to the other piece of the base, so the two pieces are joined together.
To create the base for the toy you need two pieces.
You will need to cut out two sections of the piece and glue the glue to them.
The glue will stick to the wood so it does not separate.
Then you will need a piece of card stock to glue the two parts together.
You want to make sure you have enough glue to hold all of the pieces together so that they will not separate during assembly.
Once all of these pieces are attached to each other, glue the bottom piece to the two sides of the plastic frame, and glue it to the top.
You should be able to see a few spots where glue sticks to the cardboard and the glue will hold it together.
Make sure that the glue is not on the sides of your plastic.
If it is, you may need to add a little bit more glue to make it stick.
Now you can attach the toy to the plastic, making sure that you are not touching the plastic with your hands or the sides.
You are going to glue it back together again and again until you have everything glued back together.
Now, it is time to cut the plastic.
I used a circular saw to cut through the cardboard to about 3/8 inch thick.
I would suggest cutting the plastic at least 3 times so that you can see all the pieces.
This will allow you to cut it into smaller pieces, which you can then glue onto the bottom of the mold.
This should look something like this: Now that all the plastic pieces are glued on, you need some sort of glue.
You have two choices here.
You could either use a glue gun, which is a little cumbersome, or you can buy glue, which does not require a lot of effort.
I found that the cardboard is actually much easier to glue to than the plastic and I like that the plastic is more flexible.
The second option is to buy some sort, and you have a few choices.
The most popular glue is usually acetone which is made from baking soda.
It has a slightly bitter taste and can easily be burnt on the tongue.
This is one of the most commonly used glue and I use it for a lot more projects than just making toys.
But it is quite pricey, so if you want to use something cheap, just make sure that it is not as strong as the acetone.
This glue will work for most parts of the wood frame.
But the glue on the base is going to be different.
I did not bother cutting the wood on the plastic because I had already glued the base to the rest of the model.
I glued the plastic on to the wooden frame and the plastic base to that.
You may have noticed that I left some gaps in the plastic that were not covered up with glue.
The reason is that it will be more difficult to glue these gaps to the bottom portion of the doll when you cut the wooden piece.
I made a small hole in the wooden portion to hold the plastic for a while and then made a larger hole in it to glue everything together.
This way you will be able just as easily glue it onto the wooden doll as you will onto the plastic doll.
If this looks like too much work, you could also make the glue with some acetone, but that is much easier for you.
If your glue gun doesn’t work, or if you have trouble getting the glue out of the cardboard, then you can try to buy acetone at a store that sells glue.
I use a piece from Walmart.
This has the highest acetone content in the store, but if you are very picky you could buy it from a friend or a store.
Here is how I made the glue: Take a piece or two of wood.
If possible, use a board. I usually